智之 河田 Posted June 1 Posted June 1 We have confirmed that the connection method from the pool settings is not reflected in some Horizon Clients. When deployed for the first time with Instant Clone, if PCoIP is explicitly specified in the pool settings, the virtual machine will be connected to PCoIP, but some versions of the Horizon Client force the connection to change to Blast connection from the time it is rebuilt. I am only aware of 8.3 and the same phenomenon occurs on different thin client terminals. The previous and following 8.1 and 8.4 versions do not have this problem. If you are using the latest version, you should be fine, but if you encounter this strange phenomenon, please check your Horizon Client version.
Matthew Heldstab Posted June 1 Posted June 1 Tomoyuki- Is this what you are talking about? When I connect to a pool that defaults to Blast, using the Horizon Client 8.3 (Build 2106), and change the client protocol to PCoIP it indeed uses PCoIP for me. Are you saying it is reverting to Blast for you? 1 Matthew Heldstab Enterprise Systems Engineer, Minnesota State Colleges and Universities VMUG Vice President | VMware vExpert x10 EUC Champ/vExpert EUC x8 Blog: vmatt.net TwiX: @mattheldstab LI: https://www.linkedin.com/in/matt-heldstab-27387a6/
智之 河田 Posted June 2 Author Posted June 2 Hi Matthew It may be more correct to say that the connection changes to Blast when it is rebuilt, even though it is configured for PCoIP. When a thin client terminal is repaired or added to the pool with a version other than 8.3, the connection will be made using the explicit PCoIP protocol, and the terminal that changes to Blast will revert to the connection using the protocol explicitly specified in the pool when horizonClient is upgraded. There may be other causes, but currently the only trigger we have confirmed in the hospital is the Client version. Translated with DeepL.com (free version)
Employee Matt Baumann Posted June 3 Employee Posted June 3 8.3 is almost 3 years old. Is there a reason that you are using this old of a version. 8.12.1 is available for client versions. What version of Connection server/agent is in use? I have seen this happen when a client does not have the required protocol available. In these case Horizon can allow for the other.
智之 河田 Posted June 4 Author Posted June 4 I'm currently using versions 2106 and 2103 of Horizon. There's no particular reason for using Horizon Client 8.3, but even now, some thin client terminals come pre-installed with versions like 8.1 or 8.3. By the way, the issue mentioned above occurs in both 2103 and 2106 versions. According to the compatibility table, I don't see any problem whether it's 8.1, 8.3, or the latest version. I posted it not from the perspective of the BU but from the customer's perspective. Because there are actually devices with older Horizon Clients pre-installed, I just wanted to remind to be mindful if unintentionally connected with such protocols.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now